Table of Contents

How do you make old skateboard wheels look new?

Is it worth cleaning skateboard wheels?

How often should I clean the wheels and bearings of my skateboard in order to keep them functional? This depends on how much your ride your board. You can test your bearings by spinning the wheel by hand. If it stops quickly you should clean them, but if they spin for a good while, you’re good.

Does water ruin skateboard wheels?

Skateboard trucks can withstand water for some time, but if they get wet too frequently, they will soon start to rust. Made of synthetic hard rubber, skateboard wheels have absolutely no problem with getting wet.

How do you clean skateboard wheels and bearings?

Can I use WD40 on skateboard bearings?

It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”

What household items can I use to clean bearings?

Isopropyl alcohol and acetone are two of the most effective organic solvents that you can use in cleaning the bearings.

Method #3

1. 2 clean cans or bowls.
2. Towels or rags.
3. Coffee filter.
4. Socket wrench.
5. Kerosene, mineral spirits, or acetone.
6. Lubricant cream.

Can I use Vaseline on my bearings?

When I was a kid back in the 70s, using Vaseline was part of the common mythology; it was lighter, less viscous than regular bearing grease, so it was supposed to make your bearings turn faster. And like Bobatt, I use it on a BB, and on my wheel bearings with no discernible problems for years back then.

Can you use dish soap to clean skateboard bearings?

Once all shields are off, they should be placed in a bowl of warm water and dish soap. Do not place the shields in acetone/solvent. With your fingers, simply rub the dirt and grease off with the soapy water. Be careful not to bend the shields.

Can I use olive oil on skateboard bearings?

Grease up the bearings

A few lubricants that function admirably for skateboard bearings are sewing machine oils, skate bearing grease, or electronic oils. Try not to grease up your bearings using thick oils. Stay away from lubricants such as vegetable oil, olive oil or car oil.

Can I use cooking oil for skateboard bearings?

In a pinch, motor oil or even cooking oil will work. Wd-40 is a solvent, not a lubricant. Solvents will wear away at the plastic pieces inside the bearing that make the bearing work, and will limit the life of your bearings. Olive oil is not good, but is better than nothing, and is probably better than using a solvent.

What oil can I use for bearings?

Bearings in some applications use oil, but grease is the lubricant of choice for 80 to 90% of bearings. Grease consists of about 85% mineral or synthetic oil with thickeners rounding out the rest of the grease volume.

How do I make my skateboard bearings faster?

What are the smoothest bearings?

Swiss – Swiss bearings accelerate faster, roll smoother and last longer than traditional steel bearings. Ceramic – Ceramic bearings are lighter than steel bearings and roll smoother with less friction. Ceramic bearings also resist dirt and moisture better than steel, but aren’t completely waterproof.

How can I make my skateboard faster?

Replace smaller wheels with larger wheels. Larger wheels will make the skateboard faster. Longboards can have wheels up to 70mm, but for a regular skateboard, try a wheel of 58mm or so for speed. Clean and lubricate all moving parts of the skateboard.

What oil do you use for skateboard wheels?

All skate lube is a compromise between these two things. For 98% of skaters reading this, we recommend a thin bearing grease like Sabre Bearing Lube, Bones Speed Cream, Tri Flow, Sewing Machine Oil, Dry Chain Lube (for bikes) or similar. Synthetic Engine Oil works quite well too!

Can I use rubbing alcohol to clean my skateboard bearings?

Now that the best and worst parts are over, it’s time to reap the benefits of your labor. After you’ve let your skateboard bearings soak in the cup of isopropyl alcohol for at least 30 mins, take each bearing out individually and use a paper towel to wipe them clean and dry.

Can you use 3 in 1 oil on bearings?

Motor oil will work too. Bad oils include WD-40 and 3-in-1 (too light). If you use oil, 2 drops are usually enough. Spread it around by spinning the bearing and re-assemble.

How can I clean my skateboard griptape at home?

How do I get dirt off my skateboard griptape?

What can I use instead of grip gum?

Use Rubber to Remove Surface Crud

Most skate shops sell a piece of rubber known as “Grip Gum,” which is an effective way to get surface grime off your grip tape. Little-known secret–you can get this same type of rubber, but cheaper, at an art supply store.

Can you use an eraser to clean grip tape?

A bit like a rubber eraser used to remove pencil marks, this will remove the dirt from your grip, it’s the simplest method to use. You simply rub the rubber back and forth across your grip and the dirt comes out. If your grip isn’t too dirty, this is a great longboard maintenance method to use.